Prepare your UITC board by preloading the zip ties and zipping them loosely.
Cut 10” strips of each color of deco mesh. You'll want 23 strips of the blue and 16 strips of the red, white, and blue.Take a single strip and fold two opposite corners into the middle then scrunch it up tightly. Fold the entire piece in half.Take the folded tip and insert it into a zip tie on the outer ring of the UITC board and tighten the zip tie. Repeat all the way around the row on the board. Cut off your excess zip ties.
Move inside one row of zip ties on the board and repeat the same process with strips of your red, white, and blue poly burlap mesh.Go all the way around the row on the board. Remember to cut off your excess zip ties as you go.
Move inside another row on your UITC board and grab strips of your blue mesh then repeat the same process all the way around the row.
Now fill in your innermost row with your red, white, and blue mesh and repeat the same process all the way around.
Finally, add the flower center to the middle of the UITC board by securing the pipe cleaner to the back.
Find the top of your board (it has the most holes). Go ahead and add a pipe cleaner to make your hanger.