Place pink vinyl stickers in the middle of your UITC Character board before starting. Insert pipe cleaners in every other hole along the inside ring. Then twist. That gives you 8 total. Now repeat the same process but in the outer holes.
Take your mesh and fold it down, bring in the outside edges and bring it into the middle and hold tight. Alternating holes make mesh poofs with the burlap mesh at 10 inches. Repeat on every other pipe cleaner on the inside ring.
Cut your pink and stripe mesh into 4 pieces at 20 inches and 4 pieces at 30 inches. Take each individual mesh pieces you just cut of your 30-inch pieces and make a ruffle. Fold in your end pieces, then crinkle in till you meet in the middle.
Place each ruffle into the outer pipe cleaners you already placed. Alternate your ruffles with your pink and beige striped mesh pieces. Now with your 20 inches pieces of mesh, you cut and add to the inside of your board between your poofs. Alternate your colors.
Make your bow to make your ice cream cone. Start making your bow by using your 2.5 inches of black and white striped ribbon. Measure out a 12-inch tail. Make a 7 inches loop. Pull down the tail. Repeat the same steps with the next ribbon choice. With your 3rd ribbon color, you are repeating the same steps. Two loops and two tails opposite. Now with your 4th color ribbon make your loops and we don't want these tails the same length. Make them shorter.
Throw in some blue ribbon with a bit of sparkle. Measure the loops the same as all the others. Bring in some yellow with a yellow and white striped ribbon. Making only two loops and two tails. Bring in two more colors and finish with a red ribbon to top off your bow. Secure your bow with a red pipe cleaner.
Throw in some blue ribbon with a bit of sparkle. Measure the loops the same as all the others. Bring in some yellow with a yellow and white striped ribbon. Making only two loops and two tails. Bring in two more colors and finish with a red ribbon to top off your bow. Secure your bow with a red pipe cleaner.
Fluff your ribbon loops and make your bow presentable. Using the pipe cleaner stems attach your bow to your wreath. Using either floral pins or pipe cleaners attach your ice cream cone wreath attachment opposite where you placed your bow. Dovetail your ribbon tails.
Use 5 of the ribbons you used in your bow. Cut into 13 inches each. Dovetail the ends on both sides. Add in your ribbon tails starting around the outside. Gather three tails on top of each other and pinch in the middle. Then Place in a pipe cleaner that is securing your mesh.
Use your last two ribbons, layer them and add them to the outside of the wreath. Attach a hanger to your board.