Fluff out the ivy and separate the short layers at the top and the long layers in the bottom.
Grab your fountain grass and pop out the stems from the sides, this opens up negative space from the left, middle, and right sides.
Lay your ivy on top of the fountain grass. So the long fountain grass sprays just kind of flow through that negative space.
Maneuver them in and around and through so that the ivy and fountain grass are becoming one with each other.
Take your wisteria spray and separate the layers.
Lay them right up in under, so that these layers can go through those spaces.
Zip tie the three stem bases together.
And for added security you can add one more right above it, just to get those three stems really together.
Then, grab the stem and bend it all the way over to create a swag hook. Zip tie in place. Give it a little twist to the side, so that it's paddling, flush against the back of where your door will be.
Using your 1.5" ribbon, make a long tail.
Create 4 large loops, leaving the decorative side outward.
Secure with a zip tie. Cut excess zip tie tail.
Curl in the ribbon tails.
Use the bow to cover up the stem bunch at the top of the swag. Secure with a zip tie.
Trim the bloom of the Peony and attach to the top of the swag to hide the stems below the hook.