Let's start with 16 inches for the tail using 2.5" wired ribbon and then make an 8-inch loop on each side. We're going big on this one y'all, and end with another 16-inch tail.
We're going to add one more 16-inch strip. Just a tail in here.
Now we'll do our 4 loops with the 1.5" wired ribbon. The loops are going to be slightly smaller.
Next, 2 loops of 1.5" wired ribbon, one loop on each side, slightly smaller.
For this one, I just want an extra 16-inch tail of 5/8" ribbon. This time I'm going to put opposite from the other tail that we did. All right y'all. So if you've been making bows, with an easy bow maker and you've been getting that weird gap in the top center, just add an extra tail in there.
Let's do our double (4 loops, 2 on each side) using 5/8" ribbon.
Then 2 loops with another 5/8" ribbon.
Now we're going to end it with one loop from the black and white and red.
Get some pipe cleaners, twist these together. Y'all, I didn't want those hearts to be upside down. Get it nice and tight and twist it off.