1.5rolls of 10”x 10 yard Decomesh(I am using a foiled red and green stripe)
Embellishments to decorate tree (optional)
Instructions
Pre-load all sets of holes closed on the board. There are 65 sets of holes.
After your board is pre-loaded, cut the deco mesh or other materials you're using. Cut 65 pieces to size 9×10”, which is about 1.5 10 yard rolls.
Once completed take your mesh and turn it into a diamond shape with the curl side up by taking the corner and roll from one corner to the opposite corner.
Once rolled, fold that piece of mesh in half with both ends pointing in the same direction. Make sure each side of the folded pieces are the same length.
Take the folded end of the mesh and place it into the zip tie on the bottom row.Next, put the folded end into the zip tie about a half an inch in and zip it up nice and tight. Do this for the whole row.
Once you have all your pieces placed and secured in that row, cut off all the zip tie tails.For the edge/side pieces you want to make sure your Deco mesh is slightly turned, laying along the contour of the side of the board.
Keep doing this process all the way to row number 1.
Once you have completed adding the deco mesh, add your hanger.
Notes
Note: You don’t have to use all the same mesh you can intermingle different meshes and/or different colors. A really nice example would be to use alternating lighter and darker greens.