Use the EZ Bow Maker to make (4) 6” loops with 10” tails in an “X” shape with your ribbon. Add 2 more loops in the middle and a smaller center loop for a total of 7 loops and two tails.
Carefully pull your bow off your EZ Bow Maker and use a pipe cleaner to secure it with a tight twist.
Repeat the same process 2 more times so that you have a total of 3 bows.
Put The Wreaths Together
Take your first grapevine and your first bow and use the pipe cleaners to attach the bow to your grapevine.
Repeat Step 1 two more times so that each grapevine wreath has a bow attached.
Cut your greenery off the main stem to separate it and add it to the grapevine both above and below the bow. Add a small piece of greenery at the top of the bow.Secure each stem after you add it to the grapevine with a dab of hot glue.
Repeat this process to add greenery to the other 2 grapevines.
Each grapevine will have its own color of florals. Take your first floral bundle and separate the stems, cutting them away from the main stem piece. You’ll end up with 3 stem pieces of florals. We’re going to put 2 of them towards the bottom of the bow and 1 towards the top.
Repeat the same process with the florals for your remaining grapevines.
Fluff everything out to make each wreath look whimsical. Trim the ends of the bow tails, and you’re done!
Video
Notes
Tip: If you have trouble pushing the pipe cleaner through your grapevine, here’s a trick you can do. Take your needle nose pliers and push them through the wreath. Use them to grab the pipe cleaner, squeeze closed, and pull back through so that the pipe cleaner comes out the other side.