Start with a pancake wreath base.

Add 12 x pipe cleaners around the base by twisting them to secure them.

Take a 10” mesh and cut 12 x 22” pieces.

Take 6 x mesh and make ruffles by pinching the middle together.

Add the 6 x ruffles to the outer ring of the wreath using the pipe cleaners.

Take 2 x ribbon and cut 12 x 12” pieces of each.

Pair the ribbons in groups of 2.

Dovetail the ends.

Add 6 x of the layered ribbons to the outer ring using the pipe cleaner.

Trim the ends of the pipe cleaners.

Add your second layer of mesh and ribbon tails

Take 6 x mesh and make ruffles by pinching the middle together.

Add the 6 x ruffles to the inner ring of the wreath using the pipe cleaners.

Add 6 x of the layered ribbons to the inner ring using the pipe cleaner.

Trim the ends of the pipe cleaners.

Take 1 x ribbon and make a bow with 2 x loops.

Take 4 x ribbons and make a bow with 4 x loops each.

Layer your bows.

Add a pipe cleaner to the back of the bow.

Secure the bows and pipe cleaner with a pipe cleaner.

Take 7 x ribbons and cut a piece of each for extra bow tails.

Layer the tails.

Secure your tails in the center with a pipe cleaner.

Add the tails to the back of the bow using the pipe cleaners.

Add your bow to the bottom center of the wreath using pipe cleaners.

Dovetail the ends.

Fluff out your bow.

Take your sign and add cable mounts to the back of it.

Add pipe cleaners to the cable mounts.

Add your sign to the center of the wreath using the pipe cleaners.