Remove the contents from your box. You should find a base and 4 pegs.
Set the base down in front of you. Then use your hammer to tap the short peg into the front small hole until it’s all the way in.
Next, repeat the process to tap the two taller pegs into the holes above the short peg until each is fully inserted.
Now is time to insert the spool holder. You’ll take the last tall peg and use the hammer to tap the peg into the final hole down on the end.
Notes
Note: FYI, the holes are smaller than the pegs. The maker is designed that way intentionally to create a tight fit in order to keep the bows you make in place. Once the EZ Bow Maker is completely assembled, the pegs are not to be removed.